Hello, friends.

So I’ve had my Pi-Hole setup for awhile now and it’s great. I’d like to get Wireguard working with it, too, so I could browse the internet without loads of ads and trackers on the go.

However, small issue. All DNS traffic is forcibly routed to my ISP. If you need some details, I made this post on the Pi-Hole userspace.

I’m in America and my ISP is Spectrum. I was wondering if there’s a way I could convince technical support to allow me to use a recursive DNS for privacy/security (more-so the second of the two) purposes, or if it is even possible to convince them to do this. I don’t know if there’s a specific number I should contact, email I should email to, or if I just have to endure the nightmare of getting passed around by customer service one Saturday. Any recommendations would be great.

An interesting note for anyone who’s ISP is Spectrum, their DNS service, at least for me, uses OpenDNS with dnsmasq-2.57. That version of dnsmasq is over 10 years old. You see if this is the case for you with

dig CHAOS TXT version.bind @192.33.4.12 +short
dig CHAOS TXT version.bind @198.97.190.53 +short

Or something similar if those IP addresses are different for you. You can see that running those commands were a part of the steps I was asked to take in that Pi-Hole userspace post.

EDIT 1:

For those interested, here’s some Github gist I found that shows how to use unbound + stubby for have a recursive DNS + DNS-over-HTTPS. There’s also this from the DNS Privacy Project.

EDIT 2:

I seems that initial answer from the Pi-Hole forums was correct. There’s probably something that was set in the firmware for the Netgear router that prevents me from setting up my own DNS servers. However, I notice on the router there’s a “router mode” option that’s on, which I can probably turn off, plug in my Pi to the Netgear device and have the Pi act as my router, thus letting me be able to use it as my DNS server as well. That or just suck it up and buy only a modem, not a router + modem combo.

  • duffkiligan@lemmy.world
    link
    fedilink
    English
    arrow-up
    5
    ·
    edit-2
    1 year ago

    I think you mean router, since you would most likely not set DNS on a modem (unless it’s a combo) — but yes I would look into getting something better that you have more control over.

    Edit: gotta love new Lemmy clients that spam comment replies 🤦‍♂️

    • AlecStewart1st@lemmy.worldOP
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 year ago

      It’s a combo. Most are these days, I believe, but I know Spectrum is weird and will give you a router AND modem if you just buy it through them. What device would you recommend? I don’t want to buy one just to find out I can’t set the Pi-Hole as the DNS server on a new one.

      • duffkiligan@lemmy.world
        link
        fedilink
        English
        arrow-up
        2
        ·
        1 year ago

        I use a Unifi system which is going to be overkill for 99% of people, but as far as Modems only go Arris Surfboards are solid and I’ve never had an issue.

        For router you can get whatever is your fancy, mesh system or a big multi antenna whatever.

        • Clegko@lemmy.world
          link
          fedilink
          English
          arrow-up
          2
          ·
          1 year ago

          Moto’s DOCSIS modems are pretty damn solid, too. I’ve had one at my MIL’s house doing gigabit for a few years now and haven’t had a lick of issue with them.

          • duffkiligan@lemmy.world
            link
            fedilink
            English
            arrow-up
            1
            ·
            1 year ago

            That’s still a combo device which I generally would avoid. But basically anything that isn’t provided by the cable company will be better.

      • RoyalEngineering@lemmy.world
        link
        fedilink
        English
        arrow-up
        1
        ·
        1 year ago

        I would recommend putting that modem in Bridge mode and getting something like a TP-Link Omada device. I’ve had them for a while and have been really happy.

        • AlecStewart1st@lemmy.worldOP
          link
          fedilink
          English
          arrow-up
          1
          ·
          edit-2
          1 year ago

          Seems like I could potentially get around my issue by taking the device out of this “router mode” setting I found and connecting my Pi to it via Ethernet cable and have the Pi be the router for my network.

          EDIT: Actually, scratch that. I don’t think a Pi would be powerful enough to act as a router. Well, off to by a modem (not a combo) it is!