Using KDE plasma, Archlinux, Pipewire, Focusrite 2i2 3rd Gen

Audio from built-in audio and via GPU into display speakers all works fine but audio through my Focusrite is badly distorted, like it is running at super-low quality.

I’ve spent most of today trying to work out how to make pipewire use the right bit/sample rates. It. This should be a basic GUI feature, and certainly shouldn’t need to sudo edit cryptic files to configure this stuff. I use Reaper and I’ll need to change bit / sample rates from time to time, so having to make with config files is just nuts. This should be a basic function available in the control panel (Like windows has had for decades). / rant

Anyway, I genuinely want to fix this problem and would really like a GUI tool for it, but a working config edit will do at this point. I can’ also make a script to tweak it on demand I suppose.

There is a video that suggests building a new kernel driver for it, which is even more nuts for something so basic.

  • Bleeping Lobster@lemmy.world
    link
    fedilink
    English
    arrow-up
    3
    ·
    1 year ago

    This sounds very much like the problems I had recently with two different brand new interfaces, trying to connect over USB-C. Fortunately they were both bundled with a C-to-A USB cable, which had them both working perfectly.

    Over USB-C it was disto city, like when a cable is half-unplugged. I thought maybe it was something to do with the type of USB-C ports my laptop has (one is thunderbolt, one is dual-C / thunderbolt). What sort of cable are you using?

    • mub@lemmy.mlOP
      link
      fedilink
      arrow-up
      2
      ·
      edit-2
      1 year ago

      Interesting. I’m not using USB C but it is in a 3.2 port so so maybe switching to a 3.0 port will help. I’ll give it a go.

      Edit: Nope didn’t work.

      • Bleeping Lobster@lemmy.world
        link
        fedilink
        English
        arrow-up
        1
        ·
        1 year ago

        Ah well it was worth a try.

        I’m guessing then it’s a sample rate issue, unfortunately I don’t use Linux so don’t think I can be of much help there. I know I’ve had issue before where the interface and windows were both set to a different rate (44.1 / 48) and it caused all sorts of serious sound issues. Hope you figure it out, when I can’t figure out an issue with my music setup it drives me nuts!