Update from this post from the other day: What to know before Dual Booting Windows + Linux?

TLDR: I got it working, started learning, tried to fix a grub issue and borked the whole system.


So after considering all the advice, I went and disabled/prepped/backed up, and started the process. I managed to get Fedora KDE installed on another partition and everything was looking ok. I installed some programs, started learning for a few hours, but there was one small issue. The grub configuration from the video didn’t really work. Windows wasn’t booting by default, and when I tried to do the GRUB_SAVEDEFAULT=true to have it boot the last OS, it also didn’t work. When booting windows, a message would flash by saying '/EFI/fedora/grubenv' not found.

Looking more into it, the video says to use sudo grub2-mkconfig -o boot/efi/EFI/fedora/grub.cfg but I think the correct one now is grub2-mkconfig -o /boot/grub2/grub.cfg? I found this thread, but I couldn’t run the first command because it gave a conflict error, and I think there were two versions of grub2 installed?

So anyways, I tried running the setup again, thought it was ok and did a reboot to test… and got hit with a black screen with minimal BASH like line editing is supported.

At this point I’m a little worried and lost, thinking maybe I wasn’t ready to try this, and trying to get it back the way it was. I found this guide, but I get stuck trying to mount the EFI partition.

Any tips on where to go from here? Right now I plugged in the USB I used earlier, booted Fedora from it, and opened the terminal. Past that I’m a bit lost on how to fix grub.

  • ∟⊔⊤∦∣≶@lemmy.nz
    link
    fedilink
    arrow-up
    8
    ·
    edit-2
    1 year ago

    I recently had GRUB issues which I managed to fix so I’m a little fresh in my mind. It’s 10pm here so I’ll be sleeping soon though.

    Check the Arch wiki for how to fix GRUB, it has a lot of helpful tips: https://wiki.archlinux.org/title/GRUB

    I put Mint onto a USB and then booted into the Live to be able to have full OS to fix GRUB, rather than using the rescue interface. So definitely do that if you have a spare PC you can use to put an image on a USB.

    Here’s some other links I saved:

    https://bbs.archlinux.org/viewtopic.php?id=283343

    https://wiki.archlinux.org/title/GRUB

    https://wiki.archlinux.org/title/EFI_system_partition#Mount_the_partition

    https://superuser.com/questions/165116/mount-dev-proc-sys-in-a-chroot-environment

    And I’ll post my commands I used to rebuild GRUB

    • ∟⊔⊤∦∣≶@lemmy.nz
      link
      fedilink
      arrow-up
      4
      ·
      edit-2
      1 year ago

      mint@mint:/media/mint/a96b3354-70dd-45ed-8c6c-95171e9f1e82/boot/grub$ find . -name normal.mod

      ./x86_64-efi/normal.mod

      mint@mint:/media/mint/a96b3354-70dd-45ed-8c6c-95171e9f1e82/boot/grub$ ls

      mint@mint:/media/mint/a96b3354-70dd-45ed-8c6c-95171e9f1e82/boot/grub$ vi grub.cfg

      mint@mint:/media/mint/a96b3354-70dd-45ed-8c6c-95171e9f1e82/boot/grub$ cd …/…

      mint@mint:/media/mint/a96b3354-70dd-45ed-8c6c-95171e9f1e82$ sudo mount -o bind /dev dev

      mint@mint:/media/mint/a96b3354-70dd-45ed-8c6c-95171e9f1e82$ sudo mount -o bind /proc proc

      mint@mint:/media/mint/a96b3354-70dd-45ed-8c6c-95171e9f1e82$ chroot .

      chroot: cannot change root directory to ‘.’: Operation not permitted

      mint@mint:/media/mint/a96b3354-70dd-45ed-8c6c-95171e9f1e82$ sudo chroot .

      [root@mint /]# find . -name grubx64.efi

      [root@mint /]# sudo fdisk -l

      sudo: unable to allocate pty: No such device

      [root@mint /]# exit

      mint@mint:/media/mint/a96b3354-70dd-45ed-8c6c-95171e9f1e82$ mount -o bind /dev/pts dev/pts

      mount: /media/mint/a96b3354-70dd-45ed-8c6c-95171e9f1e82/dev/pts: must be superuser to use mount.

      mint@mint:/media/mint/a96b3354-70dd-45ed-8c6c-95171e9f1e82$ sudo mount -o bind /dev/pts dev/pts

      mint@mint:/media/mint/a96b3354-70dd-45ed-8c6c-95171e9f1e82$ sudo chroot .

      [root@mint /]# sudo fdisk -l

      [root@mint /]# lsblk

      lsblk: failed to access sysfs directory: /sys/dev/block: No such file or directory

      [root@mint /]# exit

      exit

      mint@mint:/media/mint/a96b3354-70dd-45ed-8c6c-95171e9f1e82$ sudo mount -t sysfs /sys /mnt/sys

      mount: /mnt/sys: mount point does not exist.

      mint@mint:/media/mint/a96b3354-70dd-45ed-8c6c-95171e9f1e82$ sudo mount -t sysfs /sys

      mint@mint:/media/mint/a96b3354-70dd-45ed-8c6c-95171e9f1e82$ sudo mount -t sysfs /sys sys

      mint@mint:/media/mint/a96b3354-70dd-45ed-8c6c-95171e9f1e82$ sudo chroot .

      [root@mint /]# lsblk

      NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINTS

      loop0 7:0 0 2.6G 1 loop

      sda 8:0 1 14.6T 0 disk

      └─sda1 8:1 1 14.6T 0 part

      sdb 8:16 0 476.9G 0 disk

      └─sdb1 8:17 0 476.9G 0 part

      sdc 8:32 1 232.9G 0 disk

      ├─sdc1 8:33 1 223.1G 0 part

      └─sdc2 8:34 1 9.8G 0 part [SWAP]

      sdd 8:48 1 14.6T 0 disk

      └─sdd1 8:49 1 14.6T 0 part

      sde 8:64 1 29.1G 0 disk

      ├─sde1 8:65 1 2.8G 0 part

      ├─sde2 8:66 1 4.1M 0 part

      └─sde3 8:67 1 26.4G 0 part

      nvme0n1 259:0 0 931.5G 0 disk

      ├─nvme0n1p1 259:1 0 500M 0 part

      ├─nvme0n1p2 259:2 0 2G 0 part

      └─nvme0n1p3 259:3 0 929G 0 part /

      [root@mint /]# fdisk -l

      [root@mint /]# mount /dev/nvme0n1p1 /efi

      [root@mint /]# grub-install --target=x86_64-efi --efi-directory=efi --bootloader-id=GRUB

      Installing for x86_64-efi platform.

      Installation finished. No error reported.

      • ∟⊔⊤∦∣≶@lemmy.nz
        link
        fedilink
        arrow-up
        4
        ·
        edit-2
        1 year ago

        So for a step by step,

        I booted into Mint and opened a terminal and cd to my OS drive.

        I checked my grub folder:

        mint@mint:/media/mint/a96b3354-70dd-45ed-8c6c-95171e9f1e82/boot/grub$ ls

        fonts grub.cfg grub.cfg.broke grubenv locale themes x86_64-efi

        made an edit with vi (irrelevant here)

        went back to / on my OS drive

        mounted the various partitions needed, that’s all the mount -o bind commands, dev, proc, dev/pts, sys

        then chroot to my OS drive so that I’m working inside my Arch install not the Mint install

        then I mount the efi and grub install

        [root@mint /]# mount /dev/nvme0n1p1 /efi

        [root@mint /]# grub-install --target=x86_64-efi --efi-directory=efi --bootloader-id=GRUB