Njudah on Instagram

  • Showroom7561@lemmy.ca
    link
    fedilink
    English
    arrow-up
    7
    arrow-down
    1
    ·
    1 year ago

    Tried to fire up an older HP monochrome laser printer that is still working perfectly.

    The problem? Windows 11 has no drivers, and it literally cannot be used at all. Not through Wi-Fi (old drivers, too), not through the USB port, or my shared through my router.

    I mean, seriously, this stuff should work on a generic print driver until the end of time, but nope.

    • maengooen@lemmy.world
      link
      fedilink
      English
      arrow-up
      12
      ·
      1 year ago

      Hot news, linux is incredibly compatible with printers. CUPS is very well designed. With relatively little technical knowledge you could probably plug a raspberry pi into virtually any old printer and get it running with the Pi as a print server sharing it with the network.

        • WhoRoger@lemmy.world
          link
          fedilink
          English
          arrow-up
          2
          ·
          1 year ago

          It’s actually been the case for 20 years now. Same with lots of other devices.

          Around 2008-ish I saw a Tesco-branded webcam for something like 5€. I was just in need of one, so I looked up if it’s not, by any chance Linux compatible. It was, right out of the box.

          Same thing with Sony Ericsson phones of that era. Capable of lots of things, like Ethernet over USB or Mass Storage, but with Windows it all needed a massive and annoying driver package. Linux - plug and go.

          Same with Bluetooth and lots of other things.

      • Showroom7561@lemmy.ca
        link
        fedilink
        English
        arrow-up
        4
        ·
        1 year ago

        you could probably plug a raspberry pi into virtually any old printer and get it running with the Pi as a print server sharing it with the network.

        Hey, that might be a good project to try. I’ve got a Pi that’s unused :)

      • riceandbeans161@discuss.tchncs.de
        link
        fedilink
        English
        arrow-up
        2
        arrow-down
        1
        ·
        1 year ago

        we’ve done this with our router at home. Plug the printer into the router’s USB (has to be direct tho, doesn’t like a hub) and then install the drivers on my mac and it works. Even though this printer is an ancient brother.