me too, but it still didn’t work. :/

it didn’t work, but after a bit it started working again, pretty wild

It was but it got reenabled, I disabled it again but it still doesn’t work damn. I’ll post the Intel I gathered on the Linux mint forum (I did in the past but now I have more information)

@trashxeos I’m kind of lost, did you have any luck looking trough the logs of journalctl?

I’ve tried. After suspension but before modprobe the wifi is not available, after modprobe it is there, but is disabled and cannot be enabled.

deleted by creator

Yeah, thanks for the help even if you don’t know much. I get stuck on the first command where I get this error:

rmmod: ERROR: ../libkmod/libkmod-module.c:799 kmod_module_remove_module() could not remove 'iwlmvm': Operation not permitted
rmmod: ERROR: could not remove module iwlmvm: Operation not permitted
rmmod: ERROR: Module iwlwifi is in use by: iwlmvm
modprobe: FATAL: Error running remove command for iwlwifi

how do I check the name? because iwlwifi doesn’t work

Here it is, it should be the correct one: https://sharetext.me/q7eo87psmq

It doesn’t work, should it look like this the script?

#!/bin/sh
[ "$1" = "post" ] ## exec /usr/sbin/modprobe Intel Corporation Wireless-AC 9260
[ "$1" = "pre" ] ## exec /usr/sbin/modprobe -r Intel Corporation Wireless-AC 9260
exit 0

EDIT: should the name be something like wlp62s0 ??? I’m going to try it

deleted by creator

The lines are quite many, they started at 1pm, while now that I was testing it’s 5pm, only to go down by one minute it took quite a long time (definetly more than 1 minute) I’m not sure how to check

EDIT: ok I got to use -n #numer of lines

I’ve thinkered with this problem in the past, so I believe I did try restarting the network service, but I’m not sure I did

I’m trying to get the logs, but it’s difficoult to paste them all here, I got a few on this link. But they all seem from 20 October, wierd.
https://sharetext.me/nqz5mfph2y

no I have an MSI, but I hope in some ways this script helps people that might know more about it.

I’m not sure, but there is a Power Managment menu in Cinnamon and I have creenshots:

Mhm, but it doesn’t sound great. If you forget it’s on, you put it in a backpack to then get it out at around 300 degrees. Sounds like a very bad idea.

Yes I do, 1070, I’ve posted more details of my system in an answer and in the main thread. But I use the proprietary drivers not nouveau

The desktop is Cinnamon, I did include it in the original post too, maybe I should make it clearer.

Laptop is an MSI GS65-Stealth-Thin-8RF

Other System Info:

System:
Kernel: 5.15.0-91-generic x86_64 bits: 64 compiler: gcc v: 11.4.0 Desktop: Cinnamon 5.8.4
tk: GTK 3.24.33 wm: muffin dm: LightDM Distro: Linux Mint 21.2 Victoria base: Ubuntu 22.04 jammy
Machine:
Type: Laptop System: Micro-Star product: GS65 Stealth Thin 8RF v: REV:1.0
serial: \ Chassis: type: 10 serial: \ Mobo: Micro-Star model: MS-16Q2 v: REV:1.0 serial: \ UEFI: American Megatrends v: E16Q2IMS.112 date: 05/21/2019
CPU:
Info: 6-core model: Intel Core i7-8750H bits: 64 type: MT MCP arch: Coffee Lake rev: A cache:
L1: 384 KiB L2: 1.5 MiB L3: 9 MiB
Speed (MHz): avg: 941 high: 1025 min/max: 800/4100 cores: 1: 913 2: 875 3: 1025 4: 867 5: 952
6: 911 7: 979 8: 921 9: 966 10: 994 11: 904 12: 988 bogomips: 52799
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Graphics:
Device-1: Intel CoffeeLake-H GT2 [UHD Graphics 630] vendor: Micro-Star MSI driver: i915
v: kernel ports: active: eDP-1 empty: DP-1,HDMI-A-1 bus-ID: 00:02.0 chip-ID: 8086:3e9b
Device-2: NVIDIA GP104M [GeForce GTX 1070 Mobile] vendor: Micro-Star MSI driver: nvidia
v: 535.129.03 pcie: speed: 2.5 GT/s lanes: 16 ports: active: none empty: DP-2,HDMI-A-2
bus-ID: 01:00.0 chip-ID: 10de:1ba1
Network:
Device-1: Qualcomm Atheros Killer E2500 Gigabit Ethernet vendor: Micro-Star MSI driver: alx
v: kernel pcie: speed: 2.5 GT/s lanes: 1 port: 3000 bus-ID: 3d:00.0 chip-ID: 1969:e0b1
IF: enp61s0 state: down mac: \ Device-2: Intel Wireless-AC 9260 driver: iwlwifi v: kernel pcie: speed: 5 GT/s lanes: 1
bus-ID: 3e:00.0 chip-ID: 8086:2526
IF: wlp62s0 state: up mac: \ Bluetooth:
Device-1: Intel Wireless-AC 9260 Bluetooth Adapter type: USB driver: btusb v: 0.8 bus-ID: 1-14:3
chip-ID: 8087:0025
Report: hciconfig ID: hci0 rfk-id: 1 state: up address: \ bt-v: 3.0 lmp-v: 5.1
sub-v: 100

The linux proxy file has this inside it:

#!/bin/sh
#THIS IS A GRUB PROXY SCRIPT
'/etc/grub.d/proxifiedScripts/linux' | /etc/grub.d/bin/grubcfg_proxy "+'SUBMENU' as 'Advanced Options'{+'Advanced options for Ubuntu'/*, +'Advanced options for Ubuntu'/'Ubuntu, with Linux 5.15.0-75-generic'~28ff24c064536ab0cd3a1bad9f456e69~, +'Advanced options for Ubuntu'/'Ubuntu, with Linux 5.15.0-75-generic (recovery mode)'~712228d18fab4e59226cce8b4f0d3d91~, +'Advanced options for Ubuntu'/'Ubuntu, with Linux 5.15.0-73-generic'~f31b2a265d0dfef1fd439595ac77a493~, +'Advanced options for Ubuntu'/'Ubuntu, with Linux 5.15.0-73-generic (recovery mode)'~303762cfd1fb902e0cab98046932d096~, +'Advanced options for Ubuntu'/'Ubuntu, with Linux 5.15.0-72-generic'~b5308959171659a00cb9ad96851ff6a6~, +'Advanced options for Ubuntu'/'Ubuntu, with Linux 5.15.0-72-generic (recovery mode)'~30bf9c9d00d0afd9a6bbd4056b36d94e~, +'Advanced options for Ubuntu'/'Ubuntu, with Linux 5.15.0-56-generic'~a76a35ca20f2ed58db39dc7b60a1f7a6~, +'Advanced options for Ubuntu'/'Ubuntu, with Linux 5.15.0-56-generic (recovery mode)'~7e2e93487d695fdce68a6355544c0cee~}
-*
-#text
-'Ubuntu'~ff8d1852fd072e04e5a89b38002b354a~
"