So I have this external 2.5" drive salvaged from an old laptop of mine. I was trying to use it to backup/store data but the transfer to the drive fails repeatedly at the ~290GB mark leading me to believe that maybe there is a bad sector on the drive. I tried to inspect the drive using smartmontools and smartctl but since it is an external drive, i was not allowed to do so. Is there anyway for me to inspect and fix this drive? I am on fedora ublue-main. The HDD is a 1TB seagate drive.
Edit : I am a linux noob so some hand holding will be appreciated. Also i am looking to use this drive only for low priority media files which i dont mind losing so please help even though it is not the greatest idea to use a failing drive
Edit 2 : It seems my post is not clear of what i am doing. I dont want to recover data from the drive. I want to try to use more of the drive for storing data
That’s not looking good, usually on a bad sector the drive will write it to a spare sector transparently and mark it as bad internally. That means they’ve probably all already been used up.
smartctl should work just fine over USB, unless your USB adapter for the drive is really bad. Make sure you’re using sudo as well. Worst comes to worst, try using it in a different computer.
Your next goal would be to get it to do a full self test with smartctl. A low level format might help clear some bad state and it might be okay afterwards with a fresh format accounting for whatever defect it built up over time.
I wouldn’t recommend it. It might work for a bit and then just die completely.
Also interested ! But I read through my long search that bad sectors on a drive… Is a sign that your drive is failing and that there is nothing you can do about it.
Your drive will probably accumulate more and more bad sectors until it becomes unusable (there is some threshold).
There is however a way to “mark” them but thats just a temporary solution. I wouldn’t put important/critical data on it (pictures, backups, OS…)
deleted by creator
No, they’re not trying to recover data, they’re trying to copy data to the disk, to store backups, which they should absolutely not do, that disk is not fit as backup storage.
To be fair, i was trying to store some multimedia files on the drive. They are not essential(i have those essential files on another hdd). It will be good if i can use more of the potentially faulty hdd because then i can move more of these low priority media files to this drive and keep my main external drive free for important things.
I recommend to throw away this drive because blocks that are readable and writeable now, may fail soon. But if you want to use it anyway, it is possible to collect a list of unaccessible blocks usong
badblocksand pass it tomkfsto create a filesystem that ignores that blocks. IIRC this is described inman badblocks.Use ddrescue to copy to a working disk, if I remember it will try a number of times and eventually skip the broken sectors so that at least you have a working filesystem on the copy.
ddrescue to the rescue! This is the best advice to get the data out. Don’t muck about too much because more things can fail. Use ddrescue to rescue the data and write a disk image somewhere else. Then make another copy of this one and try to do the filesystem rescue magic on that copy. Really make sure the bad disk marked as unusable.
I think there is misunderstanding because of my phrasing. i dont want to recover data from the drive. Instead i want to repair the drive to use for low priority external storage.
Too far gone at this point. It sucks, but every drive has an end of life. After that point, no matter how many hoops you jump through, they’re read only until they quit entirely. I think that’s where you are now, so even if there’s something in the thread that works to get it back to being able to write to it, you should consider what you get on there as read only, and maybe that only is “only once”.
You should be able to use smartctl on a USB drive. I’ve never had an issue anyway. You may need to specify the transport type tho. I had a drive that it couldn’t figure out on its own, but since it was an sata drive in an external enclosure, atapi is the transport protocol to use
sudo smartctl -a -d ata /dev/<devid>
Using the same switch you can run a long test. It’s sort of a pain as it will kill the test on finding a bad sector. But you can take that sector number and plug it into hdparm to rewrite the sector hoping it will remap it. You won’t be able to recover the data in a bad sector, But There are these extra sectors on the drive that firmware can replace the bad one with. It does this on a forced write command.Something along the lines of
hdparm --repair-sector --yes-i-know-what-i-am-doing </dev/<driveid> <sector number from smartctl>
Again, you have data loss, you can’t go back to no loss. All you can do is rescue anything important. You may (probably) need to run a long smartctl test again, and fix another sector. I have saved data off of drives with 100+ bad sectors this way… It’s tedious and eventually I scripted it but it does work.
thanks for the help but i am unfortunately getting a
Read Device Identity failed: scsi error unsupported field in scsi commanderror for that particular drive. A different external drive also in an enclosure returns the appropriate information. I used thesmartctl --scancommand to find out the device types in both cases (both aresat)Older/shittier enclosures don’t support smart pass through. But this is an issue that’s largely been fixed for 10+ years at this point so I’m surprised op has this.
The funny thing is that the cheaper throwaway enclosure i bought supports smart pass through but the newer sata 3 capable connector does not. I am as surprised as you that this turned out to be the issue
What error do you get in the system log when the transfer fails?
How do i search for the relevant log output??
You ought to be able to use those tools on an external drive.
You can’t “fix” bad sectors. A long time ago you could run badblocks on the drive, pipe the output to a file a d feed that file to your mkfs to map around those blocks. Idk if that still works. If you do it on a drive with data it’ll destroy the data I think.
You can look at your logs to see what’s failing at 290.
bad block are not fix able. however you can create a bacd block map to make your fs skip the bad block. if you have data on your disk currently, i would suggest to use ddrescue to dump a image of your disk, and recover file from it
deleted by creator
IF you needed the storage and badly, then I remember Hiren’s BootCD used to come with a tool to scan for and quarantine bad sectors. However, this is just a bandaid on top of an infected wound.
The wound will keep spreading, eating up precious backup files. I’ve only ever used quarantining once on my mother in law’s laptop because she had to wait weeks to get a new drive, due to the Philippines flooding back then.
Also, this was an old copy of BootCD that ran through terminal prompt, not a built in Windows PE, and I believe the tool I used has been removed. However, it seems to be replaced with a few alternatives.
You can’t fix a bad drive. Well you can, but it requires a few million dollars
I would get a new drive. I’m sorry but it is a lost cause. I would recommend taking it apart before you throw it away as it looks pretty cool inside.
Tell the drive to do a secure erase. If there are still bad blocks after that, it is absolutely garbage
Frankly you should never see bad blocks, but sometimes minor bad things happen and the drive has to tell you that this data is gone forever. If you write over those bad blocks at some point, the drive is supposed to remap them to spare blocks and carry on as if everything is okay. If it has run out of spare blocks, then the bad blocks stay forever. A secure erase might give the drive more wiggle room to re-allocate around a larger bad spot, IDK.
