• jplate8@lemmy.world
    link
    fedilink
    arrow-up
    19
    arrow-down
    1
    ·
    edit-2
    1 year ago

    There are two stalls in the bathroom on my floor, and both have automatic flushing. But the one on the right is miscalibrated, so it flushes every time I lean to wipe, which is really annoying. So the one on the left is my favorite.

    • morgan423@lemmy.world
      link
      fedilink
      English
      arrow-up
      9
      ·
      1 year ago

      If it’s a sensor flusher, and you’re able to hang a piece of TP over the sensor (like it’s not built into the wall or anything), you can do that to keep it from flushing when you’re not ready.

      Then when you’re all done, just remove the TP and toss it into the bowl for the auto-flush as you’re walking away.

      • LrdThndr@lemmy.world
        link
        fedilink
        arrow-up
        5
        ·
        1 year ago

        You can hang them on the in-wall type too. Just wet a small spot on the tp (don’t use toilet water, ya gross), and stick the wet spot to the wall. It’ll adhere and drape the tp over the sensor.

        • Hazzia@discuss.tchncs.de
          link
          fedilink
          arrow-up
          4
          ·
          1 year ago

          Don’t use the toilet water, dip it in the mysterious puddle on the floor bordering the neighboring stall. Way better that way.

          • LrdThndr@lemmy.world
            link
            fedilink
            arrow-up
            2
            ·
            1 year ago

            Ah, yeah, you mean the puddle in the gas station bathroom that I never seem to notice until I have a mysterious wet spot on my pants and have to walk around with what’s probably somebody else’s slowly-drying body fluids on my leg?

            Excuse me while I burn those pants and bathe in bleach.