I’m never putting one of these in my home.

  • orclev@lemmy.world
    link
    fedilink
    English
    arrow-up
    24
    ·
    1 year ago

    There’s a middle ground as well. I refuse to put Alexa or OK Google or whatever on any of my stuff, but I run home-assistant with zigbee smart devices. My entire setup runs completely cut off from the internet. I could in theory even air gap it, although that’s a little overkill. It’s a “smart” house, but one I’m 100% in control of.

    • The Snark Urge@lemmy.world
      link
      fedilink
      English
      arrow-up
      8
      ·
      edit-2
      1 year ago

      Is that self hosted? I’d just about fuck with a FOSS self hosted smart home setup, but even then I could barely be arsed

          • orclev@lemmy.world
            link
            fedilink
            English
            arrow-up
            4
            ·
            1 year ago

            Be careful running it in a Pi because it’s a little heavy for that depending on how you configure it. A Pi model 4 is probably OK, but you wouldn’t want to run it on a model 3 or something even older, and you’re going to want to use one with at least 4GB of RAM.

              • orclev@lemmy.world
                link
                fedilink
                English
                arrow-up
                2
                ·
                1 year ago

                It will probably run even in a Pi Model 1, it’s just going to be a bit slow to interact with, and you’re not going to be able to do anything more complicated like enable the voice support (which you probably don’t want anyway, because I think it’s dependent on internet access for that, and then we’re back to the same problem as Alexa, although I don’t use it myself so I can’t say for sure).

      • orclev@lemmy.world
        link
        fedilink
        English
        arrow-up
        2
        ·
        1 year ago

        Yep, I run mine on an ODroid XU4, but you can run it on just about anything including a docker container on a generic Linux install.

    • 0110010001100010@lemmy.world
      link
      fedilink
      English
      arrow-up
      3
      ·
      1 year ago

      I’m using z-wave stuff but similar setup. Home Assistant does reach out to the cloud for some things like weather forecast and Google calendar but otherwise it will operate 100% without internet if needed. I also have cameras that while they aren’t air-gappend they are blocked from Internet access and can only talk to the NVR.